{"id":3418,"date":"2020-09-05T10:00:56","date_gmt":"2020-09-05T15:00:56","guid":{"rendered":"https:\/\/www.theadairgroup.com\/blog\/?p=3418"},"modified":"2020-09-10T12:10:58","modified_gmt":"2020-09-10T17:10:58","slug":"logo-placement-on-shirt","status":"publish","type":"post","link":"https:\/\/www.theadairgroup.com\/blog\/logo-placement-on-shirt\/","title":{"rendered":"Logo Placement on Shirts: Creating the Perfect Design"},"content":{"rendered":"

<\/b>Whether you offer screen printing, embroidery or any other type of garment customization service, you\u2019ve no doubt spent a lot of time stressing over the placement of a design. You\u2019ve probably faced this dilemma many times even if you only customize clothing as a hobby. You don\u2019t want to place the design too high, too low, too far to the left or too far to the right. You also want to avoid crooked image placement, too. And sometimes, even when things look totally right, they turn out all wrong once the image is permanently in place.\u00a0<\/span><\/p>\n

\"female<\/p>\n

When adding a logo to <\/span>blank t-shirts<\/span><\/a> or other garments, getting the placement just right is crucial. Eyeballing it <\/span>might <\/span><\/i>get you close, but no matter how good of an eye you have, it\u2019s best to measure. Yes, it takes more time, but trust us: Spending a few minutes measuring wastes way less time (and money) than getting the placement wrong because you tried to eyeball it. Plus, once you get the hang of it, the process is simple and takes very little time.\u00a0<\/span><\/p>\n

Order Your Blank T-Shirts to Start Customizing Today<\/a><\/p>\n

Not sure how to figure out proper logo placement on a shirt? Use the guide below to take the guesswork out of your creations.\u00a0<\/span><\/p>\n

Centered on Front of Shirt<\/b><\/h2>\n

When determining where to place a large logo on the front of an adult-sized shirt, the top of the logo should sit about four inches to six inches below the neck. The design should be centered between the left and right seams. If you\u2019re customizing a child-sized shirt, the design should only be about one and one-half inches to three inches below the neck.\u00a0<\/span><\/p>\n

Left Chest without Pocket<\/b><\/h2>\n

\"White<\/p>\n

On shirts without a pocket, adding a logo to the left chest area can be tricky. You\u2019ll need to measure down about seven inches to nine inches from the left shoulder seam. Then, center the logo between the center of the shirt and the left side seam. The process is the same for both t-shirts and button-down shirts.\u00a0<\/span><\/p>\n

Check Out Our Collection of Polo Shirts Wholesale<\/a><\/p>\n